Products
ArChine Comptek FSC 32
Specification：19L、200L
Scope of application：
Introduction：For spiral freezers operating at extremely low temperatures including cryogenic-freezing temperatures
ArChine Comptek FSC 32
Food Grade Compressor Oil
NSF Registration No. 148520 Place of Origin: Shanghai,China
GENERAL:
ArChine Comptek FSC 32 is custom-blended with white oil and special additives to provide excellent protection against wear and outstanding
cold-temperature fluidity. It also offers excellent water separation as well as rust, corrosion, deposit and water-washout resistance to protect
components. In addition, it resists fling-off and is designed to remain on the chain for maximum lubrication and protection.
ArChine Comptek FSC 32 is long life lubricant and recommended for use in screw compressors, evaporators and spiral freezers operating at
extremely low temperatures including cryogenic-freezing temperatures.
ArChine Comptek FSC 32 meets USDA H-1 requirements for incidental food contact and complies with requirements for FDA 21 CFR 178.3570.
ATTRIBUTES
- Excellent film strength and anti-wear properties
- Resists fling-off and remains on the chain for maximum lubrication and protection
- High stability and demulsibility in wet environments
- Excellent rust, corrosion and deposit resistance
- Non-toxic/non-hazardous
Applications
The following types of compressor applications have shown excellent performance with the ArChine Comptek FSC 32 oil:
- Primarily recommended for rotary screw and vane air compressor
- Very effective in screw type compressors with oil injection cooling
- Units operating under severe conditions
- Multistage units with a history of excessive oil degradation from mineral oil-based products
- Compressor systems with critical gears and bearings
- Compressors used in stationary and mobile applications
- For spiral freezers operating at extremely low temperatures including cryogenic-freezing temperatures
TYPICAL PROPERTIES*:
|
ISO Grade |
32 |
|
Appearance |
Colorless transparent liquid |
|
Density@ 20℃, g/cm3 |
0.854 |
|
Viscosity @ 40°C, mm2/s |
34.1 |
|
Viscosity @ 100°C, mm2/s |
5.52 |
|
Viscosity Index |
97 |
|
Pour Point, °C |
224 |
|
Flash Point, °C（open cup） |
-18 |
|
Foaming 24℃, 93.5℃, after24℃ |
0/0 10/0 10/0 |
|
Copper corrosion,100°C/3hr, grade |
1b |
*Typical data shall not be used as product specifications.
